Emulex OneCommand Manager Application User Manual (P006979-01A Version 5.2, August 2011)

The OneCommand Manager User Manual Page 113
Figure 65: Configure DCB dialog box for FCoE adapter ports (DCBX enabled)
Configure DCB Dialog Box Field Definitions
DCBX Settings Area
• Enabled - DCBX can be enabled or disabled. With DCBX enabled, the configured values are
used only if the switch does not provide them. With DCBX disabled, the configured values are
used.
• DCBX Mode - The DCBX mode can be set to CEE or Cisco-Intel-Nuova (CIN). Changes to the
DCBX mode require a reboot of the host.
• Operating Version - Operating version of the DCBX protocol. The system adjusts as needed to
operate at the highest version supported by both link partners. This setting cannot be changed.
• Maximum Version - The highest DCBX protocol version supported by the system. Version
numbers start at zero. The DCBX protocol must be backward compatible with all previous
versions. This setting cannot be changed.
LLDP Settings Area
• Transmit Enabled - LLDP Transmit can be enabled or disabled.
• Transmit Port Description Enabled - Provides a description of the port in an alpha-numeric
format. The value equals the ifDescr object, if the LAN device supports RFC 2863.
• Transmit System Name Enabled - Provides the system's assigned name in an alpha-numeric
format. The value equals the sysName object, if the LAN device supports RFC 3418.