Emulex OneCommand Manager Application User Manual (P006979-01A Version 5.2, August 2011)

The OneCommand Manager User Manual Page 114
• Transmit System Description Enabled - Provides a description of the network entity in an alpha-
numeric format. This includes system's name and versions of hardware, operating system and
networking software supported by the device. The value equals the sysDescr object, if the LAN
device supports RFC 3418.
• Transmit System Capabilities Enabled - Indicates the primary function(s) of the device and
whether or not these functions are enabled on the device. The capabilities are indicated by two
octets. Bits 0 through 7 indicate Other, Repeater, Bridge, WLAN AP, Router, Telephone,
DOCSIS cable device and Station respectively. Bits 8 through 15 are reserved.
• Receive Enabled - LLDP Receive can be enabled or disabled.
PFC Priorities Area
• Active Priorities - The priorities that are marked active for PFC.
• Enable - When checked, PFC is enabled.
• Configured Priorities - The priorities that are configured, but might not yet be active.
FCoE Priority Area (FCoE ports only)
• Active Priority - The active FCoE priority.
• Configured Priority - The configured FCoE priority.
ETS Priority Groups Area
Active Groups
• Group ID - The Priority Group ID.
• Priority Membership - The different priorities that are assigned to the various Priority Groups.
This is the currently active configuration.
• Bandwidth - The bandwidths that are assigned to different Priority Groups. This is the currently
active configuration.
Configured Groups
• Group ID - The Priority Group ID.
• Priority Membership - The configured priority membership grouping.
• Bandwidth % - The configured value of bandwidth for the different Priority Groups.
• Max Configurable PGs - The maximum number of Priority Groups that can be configured.
Configure DCB Dialog Box Buttons
• Defaults - Click to return parameters to default FCoE DCB settings.
• Configuration Rules - Click to display the window that lists the rules for configuring FCoE priority
group information.
You must observe the following rules when configuring priority groups for FCoE adapter ports: