Emulex OneCommand Manager Application User Manual (P006979-01A Version 5.2, August 2011)

The OneCommand Manager User Manual Page 115
1 One and only one priority is configured for the FCoE priority.
2. A maximum of two PFC priorities can be selected and one of them must match the
FCoE priority.
3. The priority group to which the FCoE priority is assigned must contain no other priori-
ties.
4. The additional PFC priority must be assigned to a priority group which has no other
priorities.
5. Bandwidths of all the priority groups must add up to 100%.
• OK - Click to apply and save your changes.
• Cancel - Click to discard any changes you made.
Configuring DCB Parameters for iSCSI Adapter Ports
The DCB tab displays parameters for iSCSI adapter ports.
To view the DCB parameters for iSCSI adapter ports:
1. From the discovery-tree, select the iSCSI adapter port whose DCB properties you want to view.
2. Select the DCB tab.
Figure 66: DCB tab for iSCSI adapter ports (OneConnect adapter selected)
Note: Not all adapters support two PFC priorities. Adapters that do not support two PFC
priorities display an error message if you try to configure more than one PFC priority.