Emulex OneCommand Manager Application User Manual (P006979-01A Version 5.2, August 2011)

The OneCommand Manager User Manual Page 3
* Supported only by hbacmd for the VMware release of the OneCommand Manager application. Remote
management clients can perform these functions on ESX Server adapters using the OneCommand Manager
application GUI.
** Temporary (not persistent) driver parameters are supported on VMware ESX 3i Update 4 and versions of
VMware ESX 3.5 prior to Update 4.
***DHCHAP is not supported on RHEL6 and SLES11-SP1.
****Supported on OpenSolaris only.
^ vNIC is supported only on IBM virtual fabric adapters.
FC/FCoE Boot from SAN
XXX X
iSCSI configuration
XXX
Update firmware and FC boot
code on a single adapter or
multiple adapters using batch
update
XXX X*
Enable or disable the x86
BootBIOS, EFI or OpenBoot,
PXE Boot
XXX X*
Run diagnostic tests on
adapters
XXX X
Manage local adapters
XXX X*
Manage FC remote and
TCP/IP accessed adapters
XXX X*
Locate adapters using
beaconing
XXX X
Mask and unmask LUNS
XX
Perform authentication using
FC-SP DHCHAP
X X***
Create and delete virtual ports
XXX
Run in read-only mode
XXX X*
Configure boot from SAN
XXX X*
Modify an IP port number
XXX X*
View vital product data
XXX X*
View transceiver information
XXX X*
Create SAN element reports
XXX X*
Manage adapters using CIM
X
Enable or disable FIP
XXX X*
COMSTAR support
X****
Adapter hot swapping/hot
plugging
X
Licensing
XXX X
Personality change
XXX X
Host grouping
XXX
vNIC^
XXX
Table 1: Supported Features by Operating System Cross-Reference (Continued)
Feature/Task Windows Solaris Linux
VMware ESX
Server