Emulex OneCommand Manager Application User Manual (P006979-01A Version 5.2, August 2011)

The OneCommand Manager User Manual Page 5
Installing and Uninstalling OneCommand Manager
Application Components
Installing the OneCommand Manager Application
In Windows
There are two ways to install the OneCommand Manager application in Windows:
• Attended installation using the GUI.
• Unattended installation using the command line.
Attended Installation in Windows
To install the OneCommand Manager application in Windows:
1. From the Emulex website, download the x64 or x86 OneCommand Manager Enterprise Kit
installation file.
2. Navigate to the directory to which you downloaded the file.
Note: If you are running the OneCommand Vision application, you must stop the
OneCommand Vision sensor before installing the OneCommand Manager
application.
To stop the sensor:
1. Select Start > Programs > Administrative Tools > Services.
2. Stop the EmulexSensor service.
3. Stop the EmulexWMIAgent service.
4. Stop the Emulex PDH agent service.
5. Stop the EmulexScope agent service.
6. Install the OneCommand Manager application.
To restart the sensor after the installation is complete:
1. Stop SNMP service if SNMPv2c [Stop Net-SNMP Agent if SNMPv3].
2. Start SNMP service if SNMPv2c [Start Net-SNMP Agent if SNMPv3].
3. Start the EmulexSensor service.
Note: For IA64 systems, use the x86 OneCommand Manager Enterprise installation file.