Emulex OneCommand Manager Application User Manual (P006979-01A Version 5.2, August 2011)

The OneCommand Manager User Manual Page 141
• stop - To stop the fcauthd daemon pass the stop command to the fcauthd script. This command
takes down the netlink connection between the fcauthd daemon and the LPFC driver and stops
the fcauthd daemon.
• reload - The reload command reloads the authentication configuration database into memory.
This is done whenever the database is changed by another application (the OneCommand
Manager application) or by you. If the database is changed, the new configuration information is
not used until the fcauthd daemon reloads the database.
• status - This command is used to show the current status of the fcauthd daemon. The status
should be either running or stopped.
• restart - The restart command performs a stop and then a start.
• condrestart - The conditional restart command checks the status of the fcauthd daemon. If it is
running it issues a stop and then a start command. If the fcauthd daemon is not running nothing
happens.
The DHCHAP Tab
The DHCHAP tab enables you to configure authentication.
Figure 82: DHCHAP tab
DHCHAP Tab Field Definitions
• Source - The WWPN of the adapter port.
• Destination - The fabric (switch).