Emulex OneCommand Manager Application User Manual (P006979-01A Version 5.2, August 2011)

The OneCommand Manager User Manual Page 194
Parameters:
WWPN - Adapter’s FCoE port WWPN
MAC - Adapter’s NIC or iSCSI port address
Example:
For non-ESXi hosts
>hbacmd ShowLicenseAdapterID 00-12-34-56-78-9A
For ESXi hosts
>hbacmd h=<IP_Address> m=cim u=root p=<password> n=<namespace>
ShowLicenseAdapterID 00-12-34-56-78-9A
Attributes Commands
HbaAttributes
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd [h=<IPAddress>] hbaattributes <WWPN>
Description: This command shows a list of all adapter attributes for all ports on the adapter.
Parameters:
h - Host’s IP address
WWPN - WWPN of the adapter
PortAttributes
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd <h=IPAddress of host> PortAttributes <WWPN|MAC>
Description: This command shows a list of all port attributes for the adapter.
Parameters:
h - Host’s IP address
WWPN - Port’s WWPN
MAC - MAC address of the NIC or iSCSI port
Note: For managing ESX/ESXi hosts from a Windows client, add the m=cim option to
the command. The default CIM credentials must be set using the SetCimCred
command. See “SetCimCred” on page 244.
Note: For managing ESX/ESXi hosts from a Windows client, add the m=cim option to
the command. The default CIM credentials must be set using the SetCimCred
command. See “SetCimCred” on page 244.