Emulex OneCommand Manager Application User Manual (P006979-01A Version 5.2, August 2011)

The OneCommand Manager User Manual Page 197
Parameters:
WWPN1 - Adapter’s WWPN
WWPN2 - Must be "ff:ff:ff:ff:ff:ff:ff:ff" for a switch or the actual WWPN for a target
PasswordType -
1 = ASCII
2 = Hex (binary)
3 = Password not yet defined
Password - Current password value
GetAuthConfig
Supported by: Windows, Solaris and Linux
Syntax:
hbacmd GetAuthConfig <WWPN1> <WWPN2>
Description: This command retrieves the authentication configuration for the adapter.
Parameters:
WWPN1 - Adapter’s WWPN
WWPN2 - Must be "ff:ff:ff:ff:ff:ff:ff:ff" for a switch or the actual WWPN for a target
GetAuthStatus
Supported by: Windows, Solaris and Linux
Syntax:
hbacmd GetAuthStatus <WWPN1> <WWPN2>
Description: This command returns the current status for the authentication connection specified by
WWPN 1 and 2 (adapter and the switch). It includes the current authentication state (connected or
failed). Currently authenticated connections specify the hash algorithm and DH group used in the
DHCHAP associated with this connection. Failed status includes the failure reason.
Parameters:
WWPN1 - Adapter’s WWPN
WWPN2 - Must be "ff:ff:ff:ff:ff:ff:ff:ff" for a switch or the the actual WWPN for a target
InitiateAuth
Supported by: Windows, Solaris and Linux
Syntax:
hbacmd InitiateAuth <WWPN1> <WWPN2>
Description: This command initiates the authentication configuration on the adapter.
Parameters:
WWPN1 - Adapter’s WWPN
WWPN2 - Must be "ff:ff:ff:ff:ff:ff:ff:ff" for a switch or the actual WWPN for a target