Emulex OneCommand Manager Application User Manual (P006979-01A Version 5.2, August 2011)

The OneCommand Manager User Manual Page 200
GetBootParams
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd GetBootParams <WWPN> <Type>
Description: This command shows the boot parameters. If any arguments are missing or invalid, a
suitable error is reported. If all arguments are correct, the data is displayed in tabular form.
Parameters:
WWPN - Adapter’s WWPN
Type - X86, UEFI, OB
SetBootParam
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd SetBootParam <WWPN> <Type> <Param> <Value1> [BootDev <Value2>]
Description: This command changes the boot parameters. You can change adapter parameters and
boot device parameters for OpenBoot, x86, and UEFI boot.
• When changing adapter parameters, omit the BootDev keyword and value; otherwise, an error
is reported.
• When changing bootdevice parameters for OpenBoot, omit the BootDev keyword and value;
otherwise, an error is reported.
• For boot device parameters for X86 or UEFI, you must provide the BootDev keyword and value.
Parameters:
WWPN - Adapter’s WWPN
Type - X86, UEFI, OB
Param - Parameter name
Value1 - Parameter value
BootDev - The boot device
Value2 - Boot device entry number: (0 - 7)