Emulex OneCommand Manager Application User Manual (P006979-01A Version 5.2, August 2011)

The OneCommand Manager User Manual Page 209
LoopMap
Supported by: Windows, Solaris and Linux
Syntax:
hbacmd LoopMap <WWPN>
Description: This command shows the arbitrated loop map data.
Parameters:
WWPN - Adapter’s WWPN
PciData
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd PciData <WWPN|MAC> <Type>
Description: This command shows PCI configuration data.
The PCI registers displayed are specific to the function referenced in the OneCommand Manager CLI.
For example, if you specify the WWPN for the FCoE function, the PCI registers for that FCoE function
return. If you specify the MAC address for the NIC function on that same physical port, the PCI registers
for that NIC function return.
Only the base PCI registers return. The extended PCI registers are not available on a CNA.
Parameters:
WWPN - Adapter’s WWPN port
MAC - MAC address of the NIC or iSCSI port
Type:
1 = Formatted SFS data
2 = Raw SFS data
The OneCommand Manager CLI has a command that displays wakeup parameter information, much the
same way that the OneCommand Manager application displays it in its own control field.
Example:
C:\Program Files\emulex\Util\OCManager>hbacmd h=10.192.203.154 m=cim u=root
p=Swamiji001 n=root/emulex pcidata 00-00-c9-93-2f-d6
Note: Supported for FC ports only.
Note: For managing ESX/ESXi hosts from a Windows client, add the m=cim option to
the command. The default CIM credentials must be set using the SetCimCred
command. See “SetCimCred” on page 244.