Emulex OneCommand Manager Application User Manual (P006979-01A Version 5.2, August 2011)

The OneCommand Manager User Manual Page 220
FCoE Commands
GetFCFInfo
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd GetFCFInfo <WWPN>
Description: This command shows the FCF information of the OneConnect adapter in FCoE mode.
Parameters:
WWPN - Adapter’s WWPN
Example
# hbacmd getfcfinfo 10:00:00:00:c9:3c:f7:88
GetFIPParams
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd GetFIPParams <WWPN>
Description: This command gets the FIP parameters of the OneConnect adapter in FCoE mode.
Parameters:
WWPN - Adapter’s WWPN
Example:
#hbacmd getfipparams 10:00:00:00:c9:5b:3a:6d
Note: These commands are supported only on OneConnect FCoE ports.
Note: For managing ESX/ESXi hosts from a Windows client, add the m=cim option to
the command. The default CIM credentials must be set using the SetCimCred
command. See “SetCimCred” on page 244.
Note: For managing ESX/ESXi hosts from a Windows client, add the m=cim option to
the command. The default CIM credentials must be set using the SetCimCred
command. See “SetCimCred” on page 244.