Emulex OneCommand Manager Application User Manual (P006979-01A Version 5.2, August 2011)

The OneCommand Manager User Manual Page 238
LUN Masking Commands
GetLunList
Supported by: Windows and Solaris
Syntax:
hbacmd GetLunList <HBA WWPN> <Target WWPN> <Option>
Description: This command queries for the presence of any masked LUNs.
Parameters:
HBA WWPN - Adapter’s WWPN
Target WWPN - World wide port name of the target
Option -
0 = Get information from driver
1 = Get information from configuration
GetLunUnMaskByHBA
Supported by: Windows and Solaris
Syntax:
hbacmd GetLunUnMaskByHBA <HBA WWPN> <Option>
Description: This command queries for the presence of any unmasked LUNs by adapter.
Parameters:
HBA WWPN - Adapter’s WWPN
Option -
0 = Get information from driver
1 = Get information from configuration
Note: Supported for FC/FCoE ports only.
Note: LUN masking commands are not supported by Linux.
Note: The GetLunMaskbyHBA, GetLunMaskbyTarget, RescanLuns, and SetLunMask
commands are not supported for VMware ESX and Solaris.
Note: For managing ESX/ESXi hosts from a Windows client, add the m=cim option to
the command. The default CIM credentials must be set using the SetCimCred
command. See “SetCimCred” on page 244.