Emulex OneCommand Manager Application User Manual (P006979-01A Version 5.2, August 2011)

The OneCommand Manager User Manual Page 240
MaskOp -
A = Mask LUN
B = Clear unmask target level
C = Clear unmask HBA level
D = Unmask LUN
E = Unmask target level
F = Unmask HBA level
Miscellaneous Commands
<…> = Required, […] = Optional
AddHost
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd AddHost host_address
Description: This command adds a host to the hosts file for TCP/IP management in the OneCommand
Manager GUI. The adapters for these hosts are also presented by the listhbas command. The
host_address can be an IP address, using the IPv4 or IPv6 format, or a host name.
Parameters:
host_address - Host to add
CnaClearEventLog
Supported by: Windows, Linux and VMware ESX
Syntax:
hbacmd CnaClearEventLog <WWPN|MAC>
Description: This command clears the CNA eventlog specified by the WWPN or MAC address.
Parameters:
WWPN - WWPN of the CNA FCoE port
MAC - MAC address of NIC or iSCSI port of the CNA
Note: For managing ESX/ESXi hosts from a Windows client, add the m=cim option to
the command. The default CIM credentials must be set using the SetCimCred
command. See “SetCimCred” on page 244.
Note: Supported for OneConnect adapters only.