Emulex OneCommand Manager Application User Manual (P006979-01A Version 5.2, August 2011)

The OneCommand Manager User Manual Page 245
Description: This command sets the default CIM credentials. You must specify all four credentials:
username, password, namespace and portnumber. Default credentials are used if any credential is not
in the hbacmd command argument. Once the default credentials for a host are set, any other command
can be issued by specifying m=cim.
Parameters:
h - Port’s IP Address
m - cim
username - root - Login User ID of the VMware ESX
password - Login password of the VMware ESX
namespace - Namespace where the Emulex provider is registered in the sfcb CIMOM of
VMware ESX, specifically root/emulex
portnum - Port number of the sfcb CIMOM listening to that is, 5988 (HTTP) or 5989 (HTTPS)
TargetMapping
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd TargetMapping <WWPN>
Description: This command shows a list of mapped targets and the LUNs for the port.
Parameters:
WWPN - Adapter’s WWPN
Version
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd Version
Description: This command shows the current version of the OneCommand Manager CLI Client.
Parameters: None
Note: For managing ESX/ESXi hosts from a Windows client, add the m=cim option to
the command. The default CIM credentials must be set using the SetCimCred
command. See “SetCimCred” on page 244.