Emulex OneCommand Manager Application User Manual (P006979-01A Version 5.2, August 2011)

The OneCommand Manager User Manual Page 255
GetWWNCap
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd GetWWNCap <WWPN>
Description: This command shows if volatile change is supported for the WWPN.
Parameters:
WWPN - Adapter’s WWPN
ReadWWN
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd ReadWWN <WWPN> <Type>
Description: This command reads different types of WWNs.
Parameters:
WWPN - Adapter’s WWPN
Type -
0 = Volatile
1 = Non-Volatile
2 = Factory Default
3 = Current
4 = Configured
RestoreWWN
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd RestoreWWN <WWPN> <Type>
Note: For managing ESX/ESXi hosts from a Windows client, add the m=cim option to
the command. The default CIM credentials must be set using the SetCimCred
command. See “SetCimCred” on page 244.
Note: For managing ESX/ESXi hosts from a Windows client, add the m=cim option to
the command. The default CIM credentials must be set using the SetCimCred
command. See “SetCimCred” on page 244.
Note: For managing ESX/ESXi hosts from a Windows client, add the m=cim option to
the command. The default CIM credentials must be set using the SetCimCred
command. See “SetCimCred” on page 244.