Emulex OneCommand Manager Application User Manual (P006979-01A Version 5.2, August 2011)

The OneCommand Manager User Manual Page 36
Figure 16: Add Range of TCP/IP Hosts dialog box
Prerequisites
• The OneCommand Manager application must be installed on all remote hosts.
Procedure
To add a range of remote hosts:
1. From the Discovery menu, select TCP/IP>Add Range of Hosts. The Add Range of TCP/IP
Hosts dialog box appears.
2. Enter the complete start and end address range (IPv4 only) and click Add. The added address
range appears in the dialog box. Add any additional ranges you want to search.