Emulex OneCommand Manager Application User Manual (P006979-01A Version 5.2, August 2011)

The OneCommand Manager User Manual Page 42
Figure 19: Target Login dialog box
To log into a target:
1. From the iSCSI Target Discovery tab, select the target from the Targets table.
2. Click Target Login. The Target Login dialog box appears. The dialog box displays the Target
Name and Target Alias of the target. When you log into a target and reboot the system, the
OneConnect adapter automatically logs in to that target after the reboot is complete.
3. Specify the Target Login Options and Authentication type you want to use.
4. If more than one Target Portal is available to login into the target, you can select the target portal
you want to use from the Target Portal list. To use the default Target Portal, check “Use default
target portal.”
5. Click OK. If the target was successfully logged into, the target's status in the Targets table
changes to 'Connected'.
Note: If you are logging into a target more than once, or you are logging into the same
target from multiple iSCSI ports, you must have multi-pathing software installed to
properly present the target‘s LUN(s) to the operating system.