Emulex OneCommand Manager Application User Manual (P006979-01A Version 5.2, August 2011)

The OneCommand Manager User Manual Page 49
Viewing Host Grouping Information
The Host Group Information tab displays information about the selected host group, such as the group
name, the total number of hosts and so on. See “Grouping Hosts” on page 51 to learn about creating
host groups.
To view host grouping information:
1. From the discovery-tree, select the host group whose information you want to view.
Figure 23: Host Group Information tab
Host Group Information Field Definitions
• Group Name - The name of the selected group.
• Number Hosts - The total number of hosts assigned to the group.
• Number of Adapters - The total number of discovered adapters in the group.
• Number of Ports - The total number of ports in the group.
Viewing Host Information
There are two tabs that show host information: the Host Information tab and the Host Driver Parameters
tab. The Host Information tab is read-only. The Host Driver Parameters tab enables you to view and
define adapter driver settings for a specific host. See “The Host Driver Parameters Tab” on page 100 for
more information about the Host Driver Parameters tab.
To view the Host Information and Host Driver Parameters tabs:
1. Do one of the following:
• From View menu, click Group Adapters by Host Name.
• From the toolbar, click Group Adapters by Host Name.
2. Select a host in the discovery-tree.
3. Select the Host Information tab or the Host Driver Parameters tab.
Note: Host grouping is not supported for VMware.