Emulex OneCommand Manager Application User Manual (P006979-01A Version 5.2, August 2011)

The OneCommand Manager User Manual Page 59

• NIC Only - Check to choose the NIC only personality.

• Apply button - Click to apply the personality you choose. The system must be rebooted for your

selection to take affect.

License Features Area

• Show License Features button - Click to show availble licenses.

• Install License Features button - Click to install licenses.

Viewing Port Information

The Port Information tab contains detailed information associated with the selected adapter port. The

port information that is displayed depends upon the type of adapter you select, FC, FCoE, iSCSI or NIC.

Viewing FC Port Information

When you select an FC port from the discovery-tree, the Port Information tab contains general attributes

associated with the selected FC adapter.

To view FC Port information:

1. Select Host or Fabric view.

2. Select a FC port in the discovery-tree.

Note: Some of the personalities may be disabled if the personality is not available on the

adapter.

Note: Not all information is displayed on systems using CIM provider v1.2.1 on ESX 3i.