Emulex OneCommand Manager Application User Manual (P006979-01A Version 5.2, August 2011)

The OneCommand Manager User Manual Page 61
• OS Device Name - The platform-specific name by which the selected adapter is known to the
operating system. (Not supported on VMware ESX servers being managed through the CIM
interface.)
• Symbolic Node Name - The FC name used to register the driver with the name server.
• Supported Class of Service - A frame delivery scheme exhibiting a set of delivery characteristics
and attributes. There are three classes of service.
• Class 1 provides a dedicated connection between a pair of ports with confirmed delivery or
notification of non-delivery.
• Class 2 provides a frame switched service with confirmed delivery or notification of non-
delivery.
• Class 3 provides a frame switched service similar to Class 2 but without notification of frame
delivery or non-delivery.
• Supported FC4 Types - A 256-bit (8-word) map of the FC-4 protocol types supported by the port
containing the selected adapter.
Port Status Area Field Definitions
• Link Status - The status of the link on the selected adapter port.
• Port Speed - The current port speed of the selected adapter port.
Loop Map Table Definitions
• The loop map shows the different ports present in the loop, and is present only if the port
(adapter) is operating in loop mode. The simplest example would be to connect a JBOD directly
to an adapter. When this is done, the port type is a private loop, and the loop map has an entry
for the adapter, and one entry for each of the disks in the JBOD. (Not supported on VMware ESX
servers being managed through the CIM interface. Not supported for COMSTAR ports.
COMSTAR ports are supported on OpenSolaris only.)
Port Information Buttons
• Enable\Disable Port - Click to enable or disable the selected FC port. See “Enabling and
Disabling FC Ports” on page 128 for more information.
Viewing FCoE Port Information
When you select an FCoE port from the discovery-tree, the Port Information tab contains general
attributes associated with the selected FCoE port.
To view FCoE Port information:
1. Select Host or Fabric view.
2. Select an FCoE port in the discovery-tree.
Note: Not all information is displayed on systems using CIM provider v1.2.1 on ESX 3i.