Emulex OneCommand Manager Application User Manual (P006979-01A Version 5.2, August 2011)

The OneCommand Manager User Manual Page 67
• Bandwidth Limit - The QoS bandwidth restriction on the port. (Non vNIC adapters only)
vNIC Info Area (If supported)
• Name - The name assigned to the vNIC by an administrator during switch configuration.
• Outer VLAN ID - The VLAN identifier used between the NIC port and the switch. The switch
maps this value into the VLAN ID used on the network.
• Min. Bandwidth - The minimum bandwidth (i.e. speed) at which the port is guaranteed to run.
• Max. Bandwidth - The maximum bandwidth (i.e. speed) at which the port is guaranteed to run.
Checkboxes
• Enable PXE Boot - (Preboot Execution Environment) Check the box to enable PXE Boot on the
selected port.
Viewing Physical Port Information (OneConnect Adapters Only)
The Physical Port Info tab contains a general summarization of the PCI functions under that physical
port and the current physical port status.
OneConnect OCe11100 series adapters display additional information including link speed, the
enablement state of Base-T Advertisement, auto-negotiation status and more.
It also allows you to enable or disable the physical port. See “Enabling and Disabling Physical Ports
(OneConnect Adapters Only)” on page 128 for more information.
To view physical port information:
1. Select Host view.
2. Select a OneConnect adapter port in the discovery-tree.
Note: PXE Boot is only available on ports with PCI function 0 or 1.