Emulex OneCommand Manager Application User Manual (P006979-01A Version 5.2, August 2011)
The OneCommand Manager User Manual Page 70
• Ex Count Orig - The number of FC exchanges originating on this port. (Not supported on
VMware ESX servers being managed through the CIM interface.)
• Active XRIs - The number of active exchange resource indicators. (Not supported on VMware
based ESX platforms using the CIM interface.)
• Received P_BSY - The number of FC port-busy link response frames received.
• Link Transitions - The number of times the SLI port sent a link attention condition.
• Elastic Buf Overruns - The number of times the link interface has had its elastic buffer overrun.
• Rx Frames - The number of FC frames received by this adapter port.
• Rx Words - The number of FC words received by this adapter port.
• Rx KB Count - The received kilobyte count by this adapter port.
• Rx Sequences - The number of FC sequences received by this adapter port. (Not supported on
VMware ESX servers being managed through the CIM interface.)
• NOS count - The number of NOS events that have occurred on the switched fabric. (Not
currently supported for Emulex Windows drivers or arbitrated loop.)
• Dumped Frames - The number of frames that were lost due to a lack of host buffers available.
(Not currently supported for the SCSIport Miniport driver, the Storport Miniport driver or the
driver for Solaris.)
• Loss of Sync - The number of times loss of synchronization has occurred.
• Prim Seq Prot Errs - The primitive sequence protocol error count. This counter is incremented
whenever there is any type of protocol error.
• Invalid CRCs - The number of frames received that contain CRC failures.
• Ex Count Resp - The number of FC exchange responses made by this port. (Not supported on
VMware ESX servers being managed through the CIM interface.)
• Active RPIs - The number of remote port indicators. (Not supported on VMware ESX servers
being managed through the CIM interface.)
• Receive F_BSY - The number of FC port-busy link response frames received.
• Primitive Seq Timeouts - The number of times a primitive sequence event timed out. (Not
supported on VMware ESX servers being managed through the CIM interface.)
• Arbitration Timeouts - The number of times the arbitration loop has timed out. Large counts
could indicate a malfunction somewhere in the loop or heavy usage of the loop. (Not supported
on VMware ESX servers being managed through the CIM interface.)
If you selected a COMSTAR port, the following information is also displayed:
• SCSI Write I/O Count - The number of SCSI write I/O requests received.
• SCSI Write KB Count - The total number of kilobytes written.
• Total SCSI I/O Count - The number of SCSI I/O requests received.
• No Receive Buffer Count - The number of SCSI I/O requests that were dropped.
• Queue Depth Overflow Count - The number of SCSI I/O requests received after a QFULL
condition.
• Dropped SCSI I/O Count - The number of dropped SCSI I/O operations.
• Aborted SCSI I/O Count - The number of aborted SCSI I/O operations.
• Outstanding SCSI I/O Count - The number of SCSI I/O requests currently pending.
• SCSI Read I/O Count - The number of SCSI Read I/O requests received.
Note: COMSTAR ports are supported on OpenSolaris only.