Emulex OneCommand Manager Application User Manual (P006979-01A Version 5.2, August 2011)

The OneCommand Manager User Manual Page 85
Firmware Tab Field Definitions
• Active Firmware Version - The firmware version currently being used by the adapter.
• Flash Firmware Version - The flash firmware version currently being used by the adapter.
• BIOS Version - The version of the BIOS currently being used by the adapter.
Boot Code Versions Area
• Startup-up Boot Code - The boot code version currently being used by the adapter.
• FCoE Universal - The combined flash image that includes three system specific FCoE Boot
images (Open Boot, x86, EFI 2.0).
• FCoE x86 BIOS - The single flash image containing x86 Boot for FCoE only.
• FCoE EFI - The single flash image containing EFI for FCoE only.
• FCoE FCODE - The single flash image containing Open Boot FCode for FCoE only.
• UEFI BIOS - The combined flash image that includes two boot images (UEFI NIC and UEFI
Open Boot FCode).
• UEFI NIC - The single flash image containing UEFI for NIC and PXE Boot.
• UEFI FCODE - The single flash image containing Fcode for NIC only.
• UEFI iSCSI - The single flash image containing UEFI for iSCSI only.
Firmware Tab Buttons (Not available in read-only mode.)
• Download Firmware - Click to update firmware on the selected adapter. See “Updating Adapter
Firmware” on page 144 for more information.
• Diagnostic Dump - Click to create a diagnostic dump for the selected adapter. See “Creating
Diagnostic Dumps” on page 182 for more information.
Viewing Target Information
Target Information contains information specific to the selected storage device. The type of information
that is displayed depends on the type of adapter you select, FC or iSCSI.
Note: This is the version of the code that boots the adapter. It has no relation to the FC,
iSCSI, or PXE boot code versions.