Emulex OneCommand Manager Command Line Interface User Manual (P006980-01A Version 5.2, August 2011)

OneCommand Manager Command Line Interface User Manual Page 23
PortStatistics
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd PortStatistics <WWPN>
Description: This command shows all port statistics for the adapter.
Parameters:
WWPN - Adapter’s WWPN
ServerAttributes
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd ServerAttributes <WWPN|MAC>
Description: This command shows a list of server attributes for the adapter.
Parameters:
WWPN - Adapter’s WWPN
MAC - MAC address of the NIC or iSCSI port
SetPfcThrottle
Supported by: Windows and Linux
Syntax:
hbacmd SetPfcThrottle <WWPN> <0|1>
Description: This command returns the FfcThrottle state as enabled or disabled.
Parameters:
WWPN - Adapter’s WWPN
PfcThrottle state-
0 for Disable
1 for Enable
Note: For managing ESX/ESXi hosts from a Windows client, add the m=cim option to
the command. The default CIM credentials must be set using the SetCimCred
command. See “SetCimCred” on page 73.
Note: For managing ESX/ESXi hosts from a Windows client, add the m=cim option to
the command. The default CIM credentials must be set using the SetCimCred
command. See “SetCimCred” on page 73.
Note: The PFC Throttle state returns when using the PortAttributes command for
OneConnect adapters. However for OneConnect adapters with older firmware that
does not support PfcThrottle and for non-OneConnect adapters, the PFC Throttle
state does not return when using the PortAttributes command.