Emulex OneCommand Manager Command Line Interface User Manual (P006980-01A Version 5.2, August 2011)

OneCommand Manager Command Line Interface User Manual Page 29
CEE Commands
CEEDownload
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd CEEDownload <WWPN> <Filename>
Description: This command updates the CEE firmware on the adapter.
Parameters:
WWPN - Adapter’s WWPN
Filename - Name of the file to download
GetCEEParams
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd GetCEEParams <WWPN>
Description: This command shows the CEE parameters.
Parameters:
WWPN - CNA’s WWPN
SetCEEParam
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd SetCEEParam <WWPN> <Param> <Value>
Description: This command sets or clears the Internal Host PFC flag. SetCEEParam configures one of
the CEE parameters.
Parameters:
WWPN - World Wide Port Name of the adapter
Param - Parameter name
LP21000-M and LP21002-M parameters:
Pausetype - 1 = Standard, 2 = Per Pause Priority
Note: Converged Enhanced Ethernet (CEE) commands are for CEE management of
LP21000 series adapters only.
Note: Supported for LP21000 series adapters only. Not supported for OneConnect
adapters.
Note: For managing ESX/ESXi hosts from a Windows client, add the m=cim option to
the command. The default CIM credentials must be set using the SetCimCred
command. See “SetCimCred” on page 73.