Emulex OneCommand Manager Command Line Interface User Manual (P006980-01A Version 5.2, August 2011)

OneCommand Manager Command Line Interface User Manual Page 50
iSCSI Commands
The following commands support the iSCSI interface in the OneCommand Manager CLI. The
commands and their syntax are listed here.
<…> = Required, […] = Optional
The MAC address <MAC_Address> of the CNA port must be passed to each command as the first
argument.
Some commands require values to be set in a format similar to: "option_name=value". Type the full
option name or the abbreviated option name (shown in Table 2: Option Names on page 50) and enter
the value.
The following abbreviations are available for use when setting the option name for a
“option_name=value” option. The abbreviations are not case sensitive.
AddARPTableEntry
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd [h=host_IP[:port] | hostname[:port]] AddARPTableEntry <MAC_Address>
<Dest_MAC_Address> <Dest_IP_Address>
Description: This command adds an Address Resolution Protocol table entry.
Parameters:
MAC_Address - MAC address of the CNA port
Dest_MAC_Address - Destination MAC address to add to the ARP table
Dest_IP_Address - Destination IP address to add to the ARP table
Note: iSCSI commands are supported only on OneConnect iSCSI ports.
Note: VMware ESX 4.0 does not support iSCSI.
Table 2: Option Names
Option Name Abbreviation Example
ImmediateData id id=1
DataDigest dd dd=1
HeaderDigest hd hd=1
Auth au au=1
Initiator_name in in= initiator name
Initiator_alias ia ia= initiator alias
DHCP dh dh=1
VLAN_ENABLED ve ve=1
VLAN_ID vi vi=1
Priority pr pr=1