Emulex OneCommand Manager Command Line Interface User Manual (P006980-01A Version 5.2, August 2011)

OneCommand Manager Command Line Interface User Manual Page 55
DiscoveriSNSServer
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd [h=host_IP[:port] | hostname[:port]] DiscoveriSNSServer <MAC_Address>
Description: This command discovers an iSNS server address through DHCP. If the DHCP server
returns an iSNS server address, it replaces the configured iSNS server and can be viewed using the
ShowiSNSServer command.
Parameters:
MAC_Address - MAC address of the CNA port
GetInitiatorProperties
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd [h=host_IP[:port] | hostname[:port]] GetInitiatorProperties <MAC_Address>
Description: This command shows all the initiator login options for the specified port.
Parameters:
MAC_Address - MAC address of the CNA port
GetiSCSILuns
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd [h=host_IP[:port] | hostname[:port]] GetiSCSILuns <MAC_Address>
<iscsi_target_name>
Description: This command shows all the LUNs and their information for a specified target. The iSCSI
target name <iscsi_target_name> tells the command to gather the information from the specified
iSCSI target.
Parameters:
MAC_Address - MAC address of the CNA port
iscsi_target_name - Target’s iSCSI name enclosed in quotes (string length:11-255)
Note: These properties are set as the target portal's login properties to be used when
discovering the targets on the target portal. The discovered targets inherit these
properties.