Emulex OneCommand Manager Command Line Interface User Manual (P006980-01A Version 5.2, August 2011)

OneCommand Manager Command Line Interface User Manual Page 71
Description: For reporting purposes, this command captures the SAN information in xml or csv format.
As large amount of information is output from this command Emulex recommends that you re-direct the
output to a file.
Parameters:
Format:
csv - Output information in CSV format
xml - Output information in XML format (default)
GetCimCred
Supported by: Windows
Syntax:
hbacmd GetCimCred
Description: This command shows the default credentials set for the CIM client.
Parameters: None
GetElxSecInfo
Supported by: Windows and Linux
Syntax:
hbacmd GetElxSecInfo
Description: This command shows the version of the ElxSec system.
Parameters: None
GetQoSInfo
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd [h=host_IP[:port] | hostname[:port]] GetQoSInfo <MAC_Address>
Description: This command shows the QoS information for a specified NIC port.
Note: [format] is optional. If the format parameter is specified as csv, adapter
information is shown in csv format. If the format parameter is specified as xml,
adapter information is shown in xml format. Leaving the format parameter blank
shows the data in xml format.
Note: The password is encrypted.
Note: For managing ESX/ESXi hosts from a Windows client, add the m=cim option to
the command. The default CIM credentials must be set using the SetCimCred
command. See “SetCimCred” on page 73.