HP Smart Update Manager 6.3.1 Release Notes (Ed. 2)

3. Refresh by using the command, esxcli network firewall refresh.
4. Repeat the steps for port 63002.
Special network configuration note for HP Integrity servers
HP Integrity servers have management network and production interfaces. These are usually kept on
separate subnets in an installation. To perform full remote administration of the server, access is required
for both networks. If you keep both networks isolated, you need to perform management and operating
systems tasks separately.
Enhancements
The following enhancements are included in this version of HP SUM:
• Text-based console and scripting: Text-based console mode allows you to script most of the
commands which are available in the HP SUM GUI. Functionality available from the console
includes add nodes and baselines, deploy nodes, get component logs, and generating reports.
For a list of all commands, type hpsum /h in the command line in the directory where you saved
HP SUM.
• New node type: iLO Federation - discovers the servers in an iLO Federation Trust group (Technology
preview). iLO Federation allows you to manage multiple servers from one system running the iLO
web interface. HP SUM supports performing inventory on iLO Federation nodes. For more
information about iLO Federation, see the HP iLO Federation User Guide, available on the HP
website at:
http://www.hp.com/support/ilo4_federation_ug_en
• Node groups: Grouping nodes allows you to combine nodes to assign baselines, enter credentials,
perform inventory, and other actions for nodes that share the same settings.
• Sudo/SU credential support for HP-UX: This allows you to use sudo credentials to deploy updates
without logging into the node with root credentials.
Fixes
The following fixes are in this version of HP SUM:
• Addressed potential security vulnerability CVE-2014-0160 (also known as “Heartbleed”)
• Improved report content.
• Custom baselines are created successfully on Linux systems.
• Improved user experience when deploying components using HP SUM via iLO Virtual Media.
• Offline mode hard disk drive firmware updates are being updated immediately.
• HP SUM discovers and updates hard disk drives connected behind any HP H22x Host Bus Adapter
on HP ProLiant SL230s Gen8.
• HP SUM updates the firmware on hard disk drives that are at different firmware versions and
share a common firmware component.
Downloading HP SUM
You can download HP SUM from the HP website or from the HP Software Delivery Repository.
NOTE: A copy of HP SUM is delivered with each HP SPP and HP Integrity update bundle. The version
will deploy the updates in the SPP or update bundle. The latest version of HP SUM is always available
from HP at http://www.hp.com/go/hpsum/download.
Enhancements 11