HP Smart Update Manager 6.0.0 User Guide

Table 2 HP SUM Windows network ports (continued)
DescriptionPorts
Default for some internal communications. This port listens on the remote side
if there is no conflict. If a conflict occurs, the next available port is used.
Port 62286
Updates are passed to the node and retrieved through an internal secure web
server that uses the first available port in the range of 63001-63002. This
Ports 63001–63002
allows iLO and VC firmware updates without having to access the host server.
It also allows the servers to run VMware or other virtualization platforms to
update the iLO firmware without requiring a server reboot or a migration of
the virtual machines to other servers.
Remote HP Integrity iLO and Superdome 2 updates require these ports to be
open on systems for network traffic in both directions to transfer firmware files.
You can use these FTP ports to perform switch updates.Ports 21 or 63006–63010
Table 3 HP SUM Linux network ports
DescriptionPorts
Establishes a connection to a remote node via SSH to perform node inventory.Port 22
A secure data port used to transfer information.Port 443
Default for some internal communications. This port listens on the remote side if
there is no conflict. If a conflict occurs, the next available port is used.
Port 62286
Updates are passed to the node and retrieved through an internal secure web
server that uses the first available port in the range of 63001-63002. This support
Ports 63001–63002
allows iLO and VC firmware updates without having to access the host server. It
also allows servers running VMware or other virtualization platforms to update
their iLO without having to reboot their server or to migrate their virtual machines
to other servers.
Remote HP Integrity iLO and Superdome 2 updates require these ports to be open
on systems for network traffic in both directions to transfer firmware files.
You can use these FTP ports to perform switch updates.Ports 21 or 63006–63010
Special network configuration note for HP Integrity servers
HP Integrity servers have management network and production interfaces. These are usually kept
on separate subnets in an installation. To perform full remote administration of the server, access
is required for both networks. If you keep both networks isolated, you need to perform management
and operating systems tasks separately.
GatherLogs
HP SUM provides a tool that collects all log files into one file. If you are troubleshooting an issue,
run GatherLogs. The script is available in the same directory that holds HP SUM.
64 Advanced topics