HP BladeSystem c-Class Enclosure Troubleshooting Guide

Software tools and solutions 93
4.
Use the firmware update tool to perform the firmware update. For more information on how to use the
tool, see the documentation provided with the tool.
Verifying firmware versions
Operating systems
• Verify the HP BladeSystem firmware by using the Onboard Administrator.
o HP BladeSystem c7000 Enclosure and HP BladeSystem c3000 Enclosure Onboard Administrator
firmware:
Using the OA:: The Rack Overview/Rack Firmware Summary provides firmware version
information for blades, iLOs, interconnects, and Onboard Administrators.
Using CLI: The show FRU or show OA info all commands provide firmware version information.
o HP BladeSystem c7000 Enclosure and HP BladeSystem c3000 Enclosure Insight Display firmware:
Using the OA: The Enclosure Information/Enclosure Settings/Device Summary provides firmware
version information.
Using CLI: The show FRU or show enclosure (LCD) commands provide firmware version
information.
o Server Blades/Storage Blades/PCI Expansion Blade
Enclosure Information/Device Bays/device entry/Information Tab
o Interconnect bays
o Power subsystem
o Thermal subsystem
o iLO 2
o iLO 2: Management Processor - Integrated Lights-Out 2
o Verify output from OA CLI: show update (low level FRU firmware)
• Verify the HP BladeSystem firmware using the Systems Management Homepage ("System Management
homepage" on page 92).
o Server blade firmware
o Storage controllers
o Hard drives
o NICs
• Verify the HP BladeSystem firmware by using the HP Systems Insight Manager (on page 92).
• Verify the System Management Homepage on the Server Blade at the Software Information section
• Verify the HP BladeSystem firmware by using the iLO 2 System Status Tab.
o Server blade firmware
o iLO 2 firmware