HP BladeSystem c-Class Site Planning Guide

Configuration scenarios 57
Component Quantity Watts BTUs Total
c7000 enclosure (configured)
Other rack options
Option A
Option B
Total power
Estimating total weight
You might need to determine the total weight of custom configurations if any of the following
considerations apply:
• Variations in flooring support when moving the solution during installation
• Trucking equipment limits
• Raised floor installation (calculating load limits and reinforcement)
• Secondary or tertiary floor installation
Determine the weight and floor load requirements for the purpose of site planning:
• Capacity planning: Assume that the rack will eventually be laden to its 907.18 kg (2000 lb)
capacity.
• To obtain an approximation for planning, you can use the worksheet supplied in the following table
for each rack in the configuration.
You must add the weight of any components that are not included in the list of rack options, for example
additional hard drives in the server blades. To obtain the weight of any individual component, see the
QuickSpecs on the HP website.
Component Quantity Weight (kg) Weight (lb) Total
Rack
Enclosure weight including all
components
Other rack options and requirements
Option A
Option B
Option C
Total weight