Manualshelf

HP ProLiant BL685c G7 Server Blade Maintenance and Service Guide

ManualsBrandsHP ManualsServerHP ProLiant BL685c G7 Server
31323334353637383940
Removal and replacement procedures 39
8.
Align and install the heatsink. Alternate tightening the screws until the heatsink is seated properly.
9. Install the front panel/hard drive cage assembly ("Front panel/hard drive cage assembly" on page
30), if removed.
10. Install the hard drives ("Hard drive" on page 25), if removed.
11. Install the access panel ("Access panel" on page 24).
12. Install the server blade.
System board
To remove the component:
1. Power down the server blade (on page 22).
2. Remove the server blade (on page 23).
3. Remove the access panel ("Access panel" on page 24).
4. Remove all hard drive blanks ("Hard drive blank" on page 25).
5. Remove all hard drives ("Hard drive" on page 25).
6. Remove the cache module capacitor pack ("Cache module capacitor pack" on page 29), if installed.