HP ProLiant DL100 G2 Data Protection Storage Server administration guide (June 2006)

Figure 19 Tighten front top cover screws
Rear top cover
To remove the rear top cover:
1. Loosen the
one screw securing the cover to the chassis.
Figure 20 Removing rear top cover
2. Press the button on the cover and slide the cover to the rear.
To install the rear top cover:
1. Set the cover on the server and slide it towards the front.
Figure 21 Sliding on rear top cover
2. Secu
re the cover with one screw.
HP ProLiant DL100 G2 Data Protection Storage Server
45