HP ProLiant DL100 G2 Data Protection Storage Server administration guide (June 2006)

Figure 29 Unloc k retain ing clips
2. Carefully insert the DIMM into the socket u ntil the retaining clips snap ba ck in place.
Figure 30 Inse rting DIMM into socket
3.
Reattach the rear top cover (see "Rear top cover" on page 45).
Power supply
CAUTION:
Remove power to the server by disconnecting the power cord before removing or installing a power
supply
.
Refer to Figure 31 for the location of the power supply.
HP ProLiant DL100 G2 Data Protection Storage Server
49