HP ProLiant DL100 G2 Data Protection Storage Server administration guide (June 2006)

Figure 35 Location of system fa ns
To remove a system fan:
1.
Remove the rear top cover (see "Rear top cover"onpage45).
2. Locate the cable for the fan to be removed and unplug it from the backplane connector.
Figure 36 System fan cables
3. Pull up on the fan to disengage the fan guide pins from the fan clip.
Figure 37 Lifting out fan
Reverse the steps to insert a replacement system fan.
52
Troubleshooting, servicing, and maintenan ce