HP ProLiant Gen8 Troubleshooting Guide Volume II: Error Messages

HP Smart Array errors 118
• “The Smart Array firmware is reporting that the redundant I/O modules of this
box have multiple paths to the controller”
Message Id: 24618
Severity: Warning
Log message: Array controller <controller name / slot information> is reporting that
an unsupported configuration has occurred with the redundant cabling that is
attached to port <port number>. Please check the cabling and ensure that a
supported configuration is being used.
Message Id: 24619
Severity: Informational
Log message: Fan number <fan number> in box <box number> was <inserted / removed>.
Box <box number> is attached to port <port number> of array controller <controller
name / slot information>.
Message Id: 24620
Severity: Informational
Log message: Fan number <fan number> located on fan module <fan module number> in
box <box number> was <inserted / removed>. Box <box number> is attached to port
<port number> of array controller <controller name / slot information>.
Message Id: 24621
Severity: Error
Log message: Fan number <fan number> is reporting a failure. This fan is located
in box number <box number> which is connected to port <port number> of array
controller <controller name / slot information>. The controller may attempt to
shut down the power to the storage device and/or spin down the installed disk
drive(s).
Message Id: 24622
Severity: Error
Log message: Fan number <fan number> located on fan module <fan module number> is
reporting a failure. This fan is located in box number <box number> which is
connected to port <port number> of array controller <controller name / slot
information>. The controller may attempt to shut down the power to the storage
device and/or spin down the installed disk drive(s).
Message Id: 24623
Severity: Informational
Log message: Fan number <fan number> is reporting a degraded condition. This fan
is located in box number <box number> which is connected to port <port number>
of array controller <controller name / slot information>.
Message Id: 24624
Severity: Informational
Log message: Fan number <fan number> located on fan module <fan module number> is
reporting a degraded condition. This fan is located in box number <box number>
which is connected to port <port number> of array controller <controller name
/ slot information>.