HP ProLiant Gen8 Troubleshooting Guide Volume II: Error Messages

HP Smart Array errors 127
Severity: Informational
Log message: An error log update has occurred for the physical drive with BMIC device
index <device index number> of array controller <controller name / slot
information>.
Message Id: 24683
Severity: Warning
Log message: Array controller <controller name / slot information> has reported an
uncorrectable read error during rebuild operations for logical drive <logical
drive number>. The uncorrectable media defects are between logical block address
<block address 1> and logical block address <block address 2>. The host will be
unable to read some blocks between this address range until the blocks are
overwritten. The logical drive rebuild is continuing so that the volume can regain
fault tolerance. Capacity expansion operations must be avoided while the affected
blocks are unreadable.
Message Id: 24684
Severity: Informational
Log message: The consistency initialization pass has completed for logical drive
<logical drive number> of array controller <controller name / slot information>.
Message Id: 24685
Severity: Warning
Log message: Array controller <controller name / slot information> has reported an
uncorrectable read error during surface analysis operations for logical drive
<logical drive number>. A media error was encountered that is not correctable
due to media errors on other physical drive(s) belonging to this logical volume.
The uncorrectable media defects are between logical block address <block address
1> and logical block address <block address 2>. The host will be unable to read
some blocks between this address range until the blocks are overwritten. Capacity
expansion operations must be avoided while the blocks are unreadable.
Message Id: 24686
Severity: Informational
Log message: Array controller <controller name / slot information> has reported that
the surface analysis uncorrectable read error condition for logical drive
<logical drive number> has ended. The previously reported media defects have been
overwritten. Capacity expansion operations may now be conducted.
Message Id: 24687
Severity: Informational
Log message: A firmware update is needed for the physical drive with product ID <ID
number> connected to array controller <controller name / slot information>. The
recommended minimum firmware revision should be <revision number>.
Message Id: 24688
Severity: Informational
Log message: Power supply number <power supply number> was <inserted / removed>.
This power supply is located in box <box number> which is attached to port <port
number> of array controller <controller name / slot information>.
Message Id: 24690