HP Smart Update Manager 5.3.5 User Guide
MeaningError level
The installation was not attempted because the required
hardware is not present, the software is current, or there
is nothing to install.
2
The smart component was not installed. For more
information, see the log file.
3
Multi-target servers:
MeaningError level
The installation of the deliverable was successful. No reboot
is required.
0
The installation of the deliverable was successful. Reboot
is required for the deliverable to be enabled.
1
The installation was not attempted because the version to
be installed matches the version already installed.
2
The installation was not attempted because of one of the
following:
3
• The version to be installed is older than the version
already installed.
• The supported hardware is not present, not enabled,
or in a state that an installation could not be attempted.
• The smart component does not support the environment.
• There is nothing for the component to accomplish.
If the component is being installed to a remote target, such
as an OA or other network-based deployment, this return
code indicates that the target cannot be found.
4
A user canceled the installation before anything could be
installed.
5
The installer cannot run because of an un-met dependency
or installation tool failure.
6
The actual installation operation (not the installation tool)
failed.
7
Linux RPM return codes
MeaningError level
The Linux RPM installation was successful.0
The Linux RPM installation failed.1
VMware ESXi smart-component return codes
MeaningError level
The installation of the deliverable was successful. No reboot
is required.
0
The installation of the deliverable was successful. Reboot
is required for the deliverable to be enabled.
1
The installation was not attempted because the version to
be installed matches the version already installed.
2
Command-line interface 47