HP ProLiant DL170e G6 Server Installation Sheet

2 nodes (1&3) each with 8 HDDs:
Figure 10 Drive Numbering / 24 SFF HDD Model
The supported drive configuration for 24 SFF HDD model:
4 nodes (1,2,3&4) each with 6 HDDs:
2 nodes (1&3) each with 12 HDDs:
System board components
Figure 11 System Board Components
Item Description
1 TPM connector (Optional)
2 Riser connector
Item Description
3 Processor 2
4 Processor 1 DIMM slot 1F
5 Processor 1 DIMM slot 8A
6 RPS connector
7 Processor 1
8 Processor 2 DIMM slot 1F
9 Processor 2 DIMM slot 8A
10 Internal USB 2.0 port
11 SATA 0 connector
12 SATA 1 connector
13 SATA 2 connector
14 SATA 3 connector
15 Dedicated Management Port (L0100i) (Optional)
16 SATA 4 connector
17 SATA 5 connector
18 Battery
CAUTION: For more detailed information relating to
installation of options, refer to any installation instructions
that came with the option, as well as the HP ProLiant
DL170e G6 Server Maintenance and Service Guide.
Server configuration resources
In addition to this Installation Sheet, other resources are available for
more information regarding the configuration and maintenance of
your server:
• For safety information and detailed procedures relating to
installation of options, refer to any installation instructions that
came with the option, as well as the HP ProLiant DL170e G6
Server Maintenance and Service Guide.
• For safety information and detailed procedures related to the
rest of the steps listed in the “Configuring the Server” section,
refer to the relevant chapter of the HP ProLiant DL100 Series
Server User Guide.
• For information relating to system BIOS configuration and
operating system installation, refer to the relevant section of the
HP ProLiant DL170e G6 Server Software Configuration Guide.
• Refer to the HP ProLiant DL170e G6 Server Easy Set-up CD for
additional information and updates not provided in this
installation sheet. You can also access additional information
and documentation from the HP website at
http://www.hp.com/
, either by connecting directly or through
the Easy Set-up CD.
Server configuration overview
The steps listed below give an overview of the necessary setup
procedures for preparing the HP ProLiant DL170e G6 Server for
operation:
1. Connect the AC power cord and peripheral devices.
2. Power on the server.
3. Press “F10” to enter BIOS setup.
4. Note the server BIOS version.