HP ProLiant DL170h G6 Server Software Configuration Guide

System BIOS configuration 14
Table 6 IDE Configuration submenu fields
Field Description Options
IDE Detect Time
Out(Sec)
This value is the best setting to use if the onboard IDE controllers are set
to a specific IDE disk drive in the BIOS.
0
Set this value to stop the setup from searching the IDE bus for IDE disk
drives in 5 seconds.
5
Set this value to stop the setup from searching the IDE bus for IDE disk
drives in 10 seconds.
10
Set this value to stop the setup from searching the IDE bus for IDE disk
drives in 15 seconds.
15
Set this value to stop the setup from searching the IDE bus for IDE disk
drives in 20 seconds.
20
Set this value to stop the setup from searching the IDE bus for IDE disk
drives in 25 seconds.
25
Set this value to stop the setup from searching the IDE bus for IDE disk
drives in 30 seconds.
30
35 is the default value. It is the recommended setting when all IDE
connectors are set to auto in the setup setting.
35