HP ProLiant DL170h G6 Server Software Configuration Guide

System BIOS configuration 19
Table 11 SEL Configuration submenu fields
Field Description
View BMC System
Event Log
The option specifies BMC system event log. Select this option and press <Enter> to
access the submenu to view the contents of System Event log.
Clear BMC System
Event Log
The option specifies clear system event log. If the BMC Event log is full, you can choose
this item to clear out the BMC Event log. If this option is selected, a confirmation prompt
will appear before the log is cleared.
Figure 14 Serial Port Configuration submenu
Table 12 Serial Port Configuration submenu fields
Field Description Options
Serial Port
Assignment
This setting will assign the serial port connector to the system. The
setting default value is System.
System
This setting will assign the serial port connector to the BMC (Baseboard
management controller).
BMC
Serial Port Switching This setting allows the Serial port switch between system and BMC. Enabled
This setting will prevent the Serial port from switching between system
and BMC. The setting default value is Disabled.
Disabled
Serial Port
Connection Mode
Serial port connection mode is Direct. The setting default value is
Direct.
Direct
Serial port connection mode is Modem. Modem