HP ProLiant DL170h G6 Server Software Configuration Guide

System BIOS configuration 33
Figure 29 Password installed
5. Press F10 to save the password and close the Setup Utility.
Setup automatically changes the administrator Password.
To change the Admin Password:
1. In the Security menu screen, in the Change Admin Password field, press Enter. The Enter New
Password displays. Type a new password in the Enter New Password box.
2. Type the same password in the Confirm New Password box to verify the first entry, then press
Enter. The Password Installed OK is displayed. Press Enter to finish.
To check the administrator password:
1. In the Security menu screen, select Password Check, and then press Enter.
2. Select one of the available options and then press Enter.