HP ProLiant DL180 Generation 5 Server Software Configuration Guide

System BIOS configuration

Table 5 CPU Configuration submenu fields

Field Description Options

Core Multi-processing Set this value to support multi-core processor. The optimal and setup

default setting is Enabled.

Enabled

This setting configures single logical option processor mode; Only core 0,

logical processor 0 remains active.

Disabled

Intel(R) SpeedStep (tm

Tech)

This setting is available if the processor supports SpeedStep. Enabling this

value will let CPU run at appropriate speed and voltage as determined

by the OS per system requirements.

Enabled

Disabling SpeedStep ensures that the CPU will run at maximum speed. Disabled

Harddisk Configuration submenu

Figure 7 Harddisk Configuration submenu

Table 6 Harddisk Configuration submenu fields

Field Description Options

Configure SATA #1 as

Set this option to support RAID (Redundant Array of Independent

Disks) technology, the optimal and default setting is disabled.

RAID

Enhanced (non-AHCI and non-RAID) mode, SATA drives are auto-

detected and placed in Native IDE mode.

IDE

Hot Plug Set this value to allow the hard disk drive to be used normally. Read,

write, and erase functions can be performed to the hard disk drive. This

is the default setting.

Disabled