HP ProLiant DL180 Generation 5 Server Software Configuration Guide

System BIOS configuration
15
Table 8 IPMI Device Configuration submenu fields
Field Description
Serial Port Assignment Select to assign the serial port connector to the system or to the BMC (Baseboard
Management Controller)
Serial Port Switching Enabling received escape sequences to switch serial port connector assignment.
DCD Snooping Select to enable/disable mux switch to BMC on DVD loss.
Serial Port Connection
Model
Select modem connect mode or direct connect mode.
BMC Ping Response Enabling this selection will enable ICMP ping responses
BMC Telnet Service Enabling this selection will Telnet access.
BMC HTTP Service Select this section to enable HTTP access.
Figure 10 SEL Configuration submenu
Table 9 SEL Configuration submenu fields
Field Description
View BMC System
Event Log
Select to view the contents of the System Event log.
Clear BMC System
Event Log
If the BMC Event log is full, you can choose this item to clear out the BMC Event log. If this
option is selected, a confirmation prompt will appear before the log is cleared.
Console Redirection submenu
Figure 11 Console Redirection submenu