HP ProLiant DL180 Generation 5 Server Software Configuration Guide

System BIOS configuration
21
Exit menu
The Exit menu displays several options for how to quit the Setup Utility. Select any of the exit options and
press Enter.
Figure 18 Exit menu
Table 13 Exit menu fields
Option Description
Save Changes and Exit Save the changes made and exit the Setup Utility
Discard Changes and Exit Discard the changes and exit the Setup utility
Discard Changes Discard any changes made thus far in the Setup utility.
Load Option Default Loads the default settings for all BIOS setup fields.
Recording custom Setup values
Write down the settings from the Setup Utility and keep them in a safe place. If the custom values ever
need restoring (after clearing CMOS, for example), you must run the Setup Utility and enter these custom
settings again. Having a record of these custom settings makes this much easier.
Loading system defaults
If the system fails after you make changes in the Setup menus, reboot the server, enter Setup, and load the
system default settings to correct the error. These default settings have been selected to optimize the
server’s performance. Setup default settings are quite demanding in terms of resource consumption. If you
are using low-speed memory chips or other types of low-performance components and you choose to load
these settings, the system might not function properly.
To load the system defaults: