ProLiant DL180 Generation 5 Server Installation Sheet

HP ProLiant DL180
Generation 5 Server
Installation Sheet
First edition (November 2007)
Part number 458198-001
Important Safety Information
Les "Viktig sikkerhetsinformasjon" på dokumentasjons-CDen før du installerer dette produktet.
Læs dokumentet Vigtige sikkerhedsoplysninger på dokumentations-cd'en, før produktet installeres.
Prima dell'installazione, leggere sul CD le Informazioni importanti sulla sicurezza.
Tärkeisiin turvatietoihin" Documentation CD -levyllä ennen tuotteen asentamista.
Läs dokumentet Viktig säkerhetsinformation på dokumentations-cd:n innan du installerar denna produkt.
Identifying Server Components
Front Panel Components
Figure 1 Front panel components of servers with 8 HDDs
Item Description
1 Two front USB 2.0 ports
2 Optical drive
3 Optical drive activity indicator
4 Optical drive eject button
5 Optical drive manual eject hole
6 UID LED Button
7 System Health LED
8 NIC 1 LED
9 NIC 2 LED
10 Power button
11 Thumbscrews for the front bezel
12 Optional HDD
13 Online LED
14 Fault/UID LED
15 Hard disk drive (HDD) bay
Figure 2 Front panel components of servers with 12 HDDs
Item Description
1 Two front USB 2.0 ports
2 UID LED button
3 System Health LED
4 NIC 1 LED
5 NIC 2 LED
6 Power button
7 Thumbscrews for the front bezel
8 Online LED
9 Fault/UID LED
10 Hard disk drive (HDD) bay
11 Optional HDD
Rear Panel Components
Figure 3 Rear panel components
Item Description
1 Power supply cable socket
2 T-15/T-10 screwdriver
3 Thumbscrew for top cover
4 Lowprolecardslotcover
5 PCI expansion card slot
6 Thumbscrew for PCI cage
7 HP LO100c management card port (Optional)
8 LAN port
9 4 USB 2.0 ports
10 UID LED button
11 Serial port
12 VGA port
13 PS/2 mouse port (green)
14 PS/2 keyboard port (purple)
Servercongurationresources
In addition to this Installation Sheet, other resources are available for more
informationregardingthecongurationandmaintenanceofyourserver:
•
For safety information and detailed procedures relating to installation of options,
refer to any installation instructions that came with the option, as well as the
HP ProLiant DL180 Generation 5 Server Maintenance and Service Guide.
•
For safety information and detailed procedures related to the rest of the steps
listedinthe“ServerCongurationOverview”section,refertorelevantchapterof
the HP ProLiant DL100 Series Server User Guide.
• ForinformationrelatingtosystemBIOScongurationandoperatingsystem
installation, refer to relevant section of the HP ProLiant DL180 Generation 5
Server Software Conguration Guide.
•
Refer to the HP ProLiant DL180 Generation 5 Server Support and Documentation
CD for additional information and updates not provided in this installation
sheet. You can also access additional information and documentation from the
HP website at http://www.hp.com/, either by connecting directly or through
the Support CD.
ServerCongurationOverview
The steps listed below give an overview of the necessary setup procedures for
preparingtheHPProLiantDL180G5Serverforoperation:
1.
Unpack the server and rack mounting hardware.
2.
Install other options, such as additional memory, hard drives, or
expansion boards.
3.
Install the rack rails.
4.
Mount the server in the rack.
5.
Connect the AC power cord and peripheral devices.
6.
Power up the server.
7.
Press the Esc key at the HP logo screen, and then press the Pause key to halt
screen movement.
8. Note the server BIOS version.
9.
Verify the server BIOS version against the latest BIOS version listed for this
serverontheHPwebsite:
http://www.hp.com.
10.
If you do not have the latest BIOS, update the BIOS now. Refer to the HP
ProLiant DL180 Generation 5 Server Maintenance and Service Guide available
ontheHPwebsite:
http://www.hp.com.
11.
Install a supported operating system of your choice. For detailed procedures,
refer to the documentation provided by the operating system vendor. For a list
of operating systems supported by your ProLiant server, go to
http://www.hp.com/go/supportos.
Pre- and post-installation
procedures
When installing additional options in your HP ProLiant DL180 G5 Server, observe
thefollowingprocedures:
Pre-installation procedures
1. Turn off the server and all the peripherals connected to it.
2.
Disconnect the AC power cord from the power supply connector located on the
server rear panel to reduce the risk of electrical shock.
3. Ifserverisinstalledinarack,removeserverandplaceitonaatsurface.
4.
Remove the top cover by following the procedure described later in the
“Openingtheserver”section.
Post-installation procedures
1. Be sure all components are installed according to the described step-by-step
instructions.
2.
Check to make sure you have not left loose tools or parts inside the server.
3. Reinstalltherearcage,airbafe,peripherals,andsystemcablesthatyouhave
removed.
4.
Reinstall the top cover.
5.
Reinstall server into rack.
6.
Connect all external cables and the AC power cord to the system.
7.
Press the power button on the front panel to turn on the server.
Opening the Server
The top cover and the top middle cover are detachable. You need to remove the
top cover before you can remove or replace a server component. The top middle
cover is removed to service the HDD backplane board.
Toremovethetopcover:
1.
Loosen the captive screw on the rear panel with a T-15 screwdriver.
2.
Slide the cover approximately 1.25 cm (0.5 in) toward the rear of the unit and
then lift the cover to detach it from the chassis.
3.
Lift the top cover away from the chassis.
Figure 4 Removing the top cover