HP ProLiant DL185 Generation 5 Server Installation Sheet

Identifying Server Components
Front Panel Components
Figure 1 Front panel components (for 12 HDD version)
Item Description
1 Two front USB 2.0 ports
2 UID button
3 System Health LED
4 NIC 1 LED
5 NIC 2 LED
6 Power button
7 Thumbscrew for the front bezel
8 Online LED
9 Fault/UID LED
10 Hard disk drive (HDD) bay
Figure 2 Front panel components (for 8 HDD version)
Item Description
1 Two front USB 2.0 ports
2 Optical drive (optional)
3 Optical drive activity indicator
4 Optical drive eject button
5 Optical drive manual eject hole
6 UID button
7 System Health LED
8 NIC 1 LED
9 NIC 2 LED
10 Thumbscrew for the front bezel
11 Power button
12 Online LED
13 Fault/UID LED
14 Hard disk drive (HDD) bay
HP ProLiant DL185
Generation 5 Server
Installation Sheet
First edition (November 2007)
Part number 448690-001
Important Safety Information
Les "Viktig sikkerhetsinformasjon" på dokumentasjons-CDen før du installerer dette produktet.
Læs dokumentet Vigtige sikkerhedsoplysninger på dokumentations-cd'en, før produktet installeres.
Prima dell'installazione, leggere sul CD le Informazioni importanti sulla sicurezza.
Tärkeisiin turvatietoihin" Documentation CD -levyllä ennen tuotteen asentamista.
Läs dokumentet Viktig säkerhetsinformation på dokumentations-cd:n innan du installerar denna produkt.
Rear Panel Components
Figure 3 Rear panel components (for PCI option)
Figure 4 Rear panel components (for HDD option)
Figure 5 Rear panel components (for ODD option)
Item Description
1 Power supply cable socket
2 T10/T15 Wrench
3 Thumbscrew for top cover
4a Lowprolecardslotcover
4b Opticaldrivebay(gure5)
5a PCI expansion card slot (top is slot 2, bottom is slot 1)
5b Harddiskdrive(HDD)bay(gure4)
6 Thumbscrew for PCI cage
7 Serial port
8 VGA port
9 Management LAN port
10 Two USB 2.0 ports
11 GbE LAN port for NIC2
12 GbE LAN port for NIC1
13 PS/2 keyboard port (purple)
14 PS/2 mouse port (green)
CAUTION: For more detailed information relating to installation
of options, refer to any installation instructions that came with the
option, as well as the HP ProLiant DL185 Generation 5 Server
Maintenance and Service Guide.
System Board Components
Figure 6 System board components
Item Description
1 Top: PS/2 mouse port
Bottom: PS/2 keyboard port
2 Top: LAN port
Bottom: LAN port
3 Top: USB 2.0 port
Bottom: USB 2.0 port
4 Management LAN port
5 Top: Serial port
Bottom: VGA port
6 UID LED button
7 3V CMOS battery
8 PCIe slot
9 PCIe slot
10 Chassis ID jumper
11 Redundant Power Supply Management Interface Connector
12 Internal USB connector
13 Power for rear HDD backplane
14 Password jumper
15 18-pin front panel port
16 5-pin system fan 4 header
17 IDE connector
18 SATA connector
19 Front USB 2.0 USB cable header
20 5-pin system fan 3 header
21 Processor 2 socket
22 5-pin system fan 2 header
23 DIMM slot for processor 2
24 5-pin system fan1 header
25 4-pin power connector
26 24-pin power connector
27 8-pin power connector
28 DIMM slot for processor 1
29 Processor 1 socket
Server congurationresources
In addition to this Installation Sheet, other resources are available for more
informationregardingthecongurationandmaintenanceofyourserver:
• For safety information and detailed procedures relating to installation of
options, refer to any installation instructions that came with the option,
as well as the HP ProLiant DL185 Generation 5 Server Maintenance and
Service Guide.
• For safety information and detailed procedures related to the rest of
thestepslistedinthe“ConguringtheServer”section,refertorelevant
chapter of the HP ProLiant DL100 Series Server User Guide.
• ForinformationrelatingtosystemBIOScongurationandoperating
system installation, refer to relevant section of the HP ProLiant DL185
Generation 5 Server Software Conguration Guide.
• Refer to the HP ProLiant DL185 Generation 5 Server Support CD for
additional information and updates not provided in this installation
sheet. You can also access additional information and documentation
from the HP website at http://www.hp.com/, either by connecting
directly or through the Support CD.
Server CongurationOverview
The steps listed below give an overview of the necessary setup procedures
for preparing the HP ProLiant DL185 Generation 5 Server for operation:
1. Connect the AC power cord and peripheral devices.
2. Power up the server.
3. Press F10 to enter BIOS setup.
4. Note the server BIOS version.
5. Verify the server BIOS version against the latest BIOS version listed for
this server on the HP website: http://www.hp.com.
6. If you do not have the latest BIOS, update the BIOS now. Refer to the
HP ProLiant DL185 Generation 5 Server Maintenance and Service
Guide available on the HP website: http://www.hp.com.
7. Install a supported operating system of your choice. For detailed
procedures, refer to the documentation provided by the operating system
vendor. For a list of operating systems supported by your ProLiant server,
go to http://www.hp.com/go/supportos.
Pre- and post-installation procedures
When installing additional options in your HP ProLiant DL185 Generation 5
Server, observe the following procedures:
Pre-installation procedures
1. Turn off the server and all the peripherals connected to it.
2. Disconnect the AC power cord from the power supply connector located
on the server rear panel to reduce the risk of electrical shock.
3. If server is installed in a rack, remove server and place it on a
atsurface.
4. Remove the top cover by following the procedure described later in the
“Openingtheserver”section.
Post-installation procedures
1. Be sure all components are installed according to the described step-by-
step instructions.
2. Check to make sure you have not left loose tools or parts inside
the server.
3. ReinstallthePCIcage,airbafe,peripherals,andsystemcablesthat
you have removed.
4. Reinstall the top cover.
5. Reinstall server into rack.
6. Connect all external cables and the AC power cord to the system.
7. Press the power button on the front panel to turn on the server.