HP ProLiant SL170h G6 Server Installation Sheet

Figure 10 Reinserting the processor
3. Align the processor installation tool with the socket, and then
install the processor. THE PINS ON THE SYSTEM BOARD ARE
VERY FRAGILE AND EASILY DAMAGED.
Figure 11 Installing the processor
CAUTION: THE PINS ON THE SYSTEM BOARD ARE VERY
FRAGILE AND EASILY DAMAGED. To avoid damage to the
system board:
• Never install or remove a processor without using the
processor installation tool.
• Do not touch the processor socket contacts.
• Do not tilt or slide the processor when lowering the
processor into the socket.
4. Press the tabs on the processor installation tool to separate it from
the processor, and then remove the tool.
Figure 12 Removing the tool
5. Close the processor socket retaining bracket and the processor
locking lever. The processor socket cover is automatically
ejected. Remove the cover.
Figure 13 Closing the bracket and lever, removing cover
CAUTION: Be sure to close the processor socket retaining
bracket before closing the processor locking lever. The
lever should close without resistance. Forcing the lever
closed can damage the processor and socket, requiring
system board replacement.
For processor removal, reverse the above installation procedures,
using the processor tool to remove the processor.