HP ProLiant DL320 Generation 5 Server User Guide

Hardware options installation 46
4. Disconnect any internal or external cables connected to any existing expansion boards.
5. Remove the PCI riser board assembly (on page 18).
6. Remove the expansion slot cover.
7. Install the expansion board.
8. Install the PCI riser board assembly (on page 19).
9. Install the access panel.
10. Install the server into the rack.
PCI riser board option
1. Power down the server (on page 17).
2. Extend the server from the rack, if applicable ("Extend the server from the rack" on page 17).
3. Remove the access panel (on page 18).
4. Disconnect any internal or external cables connected to any existing expansion boards.
5. Remove the PCI riser board assembly (on page 18).